88必发娱乐官网 主营:Taber耐磨试验机,马丁代尔摩擦试验机,PV1210盐雾循环试验箱,ATLAS氙灯老化试验机,38DLPLUS超声波测厚仪
站内搜索
联系我们
电  话: 021-32535039
传  真: 021-32535039
手  机: 13472521719
网  址: www.bifa88.com
联系人: 谢文清
邮  箱: xiewenqing2000@126.com
地  址: 上海市嘉定区德富路1198号803室太湖世家国际大厦
技术文章
GMW14872循环盐雾腐蚀试验箱
2017-09-02
循环腐蚀试验箱满足大多数重要的汽车腐蚀试验标准,如:GMW14872、SAE J2334以及来自Ford(福特汽车)、ISO(国际标准化组织)、VW(大众汽车)、Volvo(沃尔沃)、Chrysler(克莱斯勒)、Renault(雷诺)等的标准。

GMW14872

 

An accelerated laboratory corrosion test to evaluate automotive coatings and components.

Introduction

In 2003 the American Iron and Steel Institute, in conjunction with a Committee of the SAE, conducted a study of existing cyclic corrosion tests in order to establish the best methods of predicting the performance of materials used in automotive applications.  Twenty established corrosion test procedures were included within the study. The process itself comprised of undertaking tests on 10 different materials with each procedure, the results were compared to results gathered through real World exposure from 10 locations around the globe, undertaking the tests with identical materials.

The procedures were judged on:

  • Their ability to replicate the rank order of coatings performance in the real World.
  • Their ability to replicate the same type of failure as viewed in the real World
  • Repeatability over multiple tests
  • Speed
  • Cost effectiveness

The test established that the General Motors standard GM9540P, was one of the best methods of cosmetic corrosion prediction of cold rolled steel and resulted in the publication of it’s successor GMW14872.

Test Conditions

The test method is composed of approximately 1% NaCL, CaCL2 and NaHCO3 salt mist applications combined with high temperature and humidity drying cycles, a single cycle of the test lasts for approximately 24 hours.

Method

Specimens being tested are exposed to a multi-stage changing environment that is composed of three distinctive cycles, these stages can be varied depending on the nature of the specimen undertaking the test, for further information please refer to the full GMW14872 standard.

The individual cycles comprise of

  • An exposure of 8 hours to an ambient climate of between 40 and 50RH% at a temperature of +25C. During this period salt solution is sprayed directly on to the test samples 4 times, for long enough to thoroughly wet them. A minimum of 1 hour spacing between the end of a previous salt application and the following salt application is required. Collection  rates for each  80 cm2 of  horizontal  collection  area  should  be  in  the  range  of  0.75 mL/h  to 1.5 mL/h.
  • An exposure of 8 hours to a water fog humidity climate of 100%RH at a temperature of +49C.
  • An exposure of 8 hours to air drying in a climate of <30%RH at a temperature of +60C.

The test length is variable dependant on the number of cycles within the total test duration.

Typical Application

Through analysis of historic data it has been determined that the GMW14872 test process very closely predicts the corrosion rates for steel and zinc materials exposed to periodic de-icing salts, for this reason the standard has become very popular within the automotive industry.

Additionally the US military regularly uses the standard to predict life of a variety of coatings and materials on tactical vehicles.

88必发娱乐官网
联系人:谢文清   联系电话:021-32535039   手机:13472521719   传真:021-32535039   联系地址:上海市嘉定区德富路1198号803室太湖世家国际大厦
沪ICP备12035321号   技术支持:谷瀑环保   管理入口